Recall_Fac_Setting; Speed - JDS Uniphase SKB SERIES User Manual

Command packet
OPCODE Length
0x37 0x02

RECALL_FAC_SETTING

Description Recall the original factory setting of the switch
Parameters Switch
Parameter Switch (unsigned eight-bit)--switch number
Description
Command packet
OPCODE Length
0x38 0x01

SPEED?

Description Query the speed of the switch
Parameters Switch
Parameter Switch (unsigned eight-bit)--switch number
Description
Command packet
OPCODE Length
0x39 0x01
U8 Switch, U8 Reset_Channel
Reset_Channel (unsigned eight-bit)--The output channel to be
associated with the reset position (0 to 200)
The reset channel is defined in reference to input port 1.
This command resets the switch.
U8 Switch
Switch (unsigned eight-bit)--Logical switch number (1 to 4)
This command resets the switch. The setting is modified with the
MODIFY_SPEED, RESET_CHANNEL, REPLACE, and
SWAP_CHANNEL commands. Commands are reset to factory
defaults.
U8 Switch
Switch (unsigned eight-bit)--Logical switch number (1 to 4)
Parameters
Parameters
Parameters
Operating and Maintenance Instructions – 48