Switch - JDS Uniphase SKB SERIES User Manual

SWITCH

Description Modify logical switch state
Parameters Switch, Input, Output
Parameter Switch (unsigned eight-bit)--switch number
Description Input (unsigned eight bit)--input channel
Output (unsigned eight bit)--output channel
Command packet
OPCODE Length
0x20 0x03
SWITCH?
Description Query logical switch state
Parameters Switch, Input
Parameter Switch (unsigned eight-bit)--switch number
Description Input (unsigned eight-bit)--input channel number
Command packet
OPCODE Length
0x21 0x02
U8 Switch, U8 Input, U8 Output
Switch (unsigned eight-bit)--Logical switch number upon which to
perform action (for example, 1 to 4)
Input (unsigned eight-bit)--Input channel to connect (for example, 1
on a 1xN switch)
Output (unsigned eight-bit)--Output channel to connect specified
input channel, where
0 = reset position (factory configured to be a null connect, but this
can have been changed by user)
1 to 200 = output channel number
254 = previous channel; ignored if the switch is on the first channel
255 = next channel; ignored if the switch is on the last channel
U8 Switch, U8 Input
Switch (unsigned eight-bit)--Logical switch number upon which to
read information (for example, 1 to 4)
Input (unsigned eight-bit)--Input channel to find connection of
Parameters
Parameters
Operating and Maintenance Instructions – 40