SAVE
Description
Save the current state of all switches at one of 10 locations
Parameters
Location
Parameter
Location (unsigned eight-bit)--Memory location to save state
Description
Command packet
OPCODE
Length
0x26
0x01
RECALL
Description
Recall a module state previously saved
Parameters
Location
Parameter
Location (unsigned eight bit)--memory location
Description
Command packet
OPCODE
Length
0x27
0x01
Configuration Commands
SKB configuration commands are operations and queries that allow users to modify basic
instrument settings.
CONFIG?
Description
Query the configuration of all logical switches
Parameters
NA
Parameter
NA
Description
Command packet
OPCODE
Length
0x23
0x00
U8 Location
Location (unsigned eight-bit)--Memory location of state data (0 to 9)
U8 Location
Location (unsigned eight-bit)--Memory location of state data (0 to 9)
Parameters
Parameters
Parameters
Operating and Maintenance Instructions – 43