Table of Contents
Advertisement
Th
Fatal system elTOr ("bomb") me8sage is displayed
while
rlJDging
system software.
Record the eITOr ID code, your applicatibn, and the
operation in progress when the error occurred. Isolate
the eITOr as '.follows:
1.
Restart the system and
try
the operation
again, using
the
sa:me
diskette, to rule out a transient error.
2.
Restart the system and
try
a similar operation using
another application. If the error does not occur, then
your first application diskette has become corrupted.
Replace it from a backup copy and
try
the operation
again. If it still does not work, check \l\lith the
application dealer.
3.
Restart the system and repeat the original operation
\l\lithout Using the Mac Disk. If this works, then your
Mac Disk system file may be corrupted. Throw the
old system file
in
the trash and replace
it with
the
System
file from the System Folder on your original
Mac Disk System Diskette (see Error occurs when
running various applications above).
It
may be a good
idea to replace the applications from backup too.
4.
If none of the
above
remedies work
I
check the error
codes listed in Table B-3.
If
this does not help,
try
the
Advanced Communication Checks in this appendix or
contact your Davong dealer for assistance.
<0 Copyright 1985 Davong Systems. Inc.
Advertisement
Table of Contents
