Davong Mac Disk User Manual page 39

Volume Manager
Active/Inactive Status Buttons
The active/inactive status buttons show the cUITent
status of the volwnes on the Mac Disk. When a volume's
status button reads ACTIVE, the volume icon will appear
on the desktop when you quit Volume Manager. If the
status button reads inactive, the volume is not currently
available to Macintosh. No icon will appear on the
desktop.
'Ib
change the active/inactive status of a volwne,
click once on the status button.
You cannot change the statUs of the system volume
and the volume with Volwne Manager.
Automatic/Manual Startup Buttons
The buttons to the left of the active/inactive status
buttons show the startup status of the volumes. They
only appear when an unlocked wlac Disk system diskette
is in the Macintosh disk drive.
If a volume's startup status button is highlighted and
reads AUTO, the volume becon1es active automatically on
startup. If the button reads
manual,
you have to use
Volume Manager to make the volume active.
You can change startup status by clicking once on
the button. The change will not be effective until you save
it
to your Mac Disk system diskette, as explained in
IWaking
Volumes Auto-Active in this chapter.
5-4
© Copy tight
1985 Davong
Systems.
Inc.