Table of Contents
Advertisement
The indicator lights 8how that Mac Disk does not get
through its powerup sequence.
Perform the following checks:
1.
'fum
the Macintosh off, then
turn
the Mac Disk off
and on again.
2.
Watch the indicator lights during powerup and check
that they light
up
in the correct sequence. See
Indicator Lights During. Powerup
in
this
appendix.
If a powerup error occurs, take the Mac Disk to
your dealer.
3.
If the lights indicate that the disk has not been
initialized, run the Initialize Disk Contents
application. If the problem recurs, take the Mac Disk
to your dealer.
Software Symptoms
Error me88age appears during Mac Disk installation
or when rllDning Volume Manager.
Note the code number of the message
I
the application
you are using, and the operation in progress when the
message appeared. 'furn to
Error A1.essages
in this
appendix and find the error message in the appropriate
table. If the tables do not help,
try
the
Advanced
Communications Checks
in this appendix or contact your
Davong dealer for assistance.
BlTor occurs when
running
an application.
The problem may be due to the application, not the Mac
Disk.
'Try
using a different application to do a similar
task.
If
the error repeats, restart and run the application
again to nlie out transient error. If the eITor recurs,
replace the original application from its backup and
retest. If the problem persists,
try
the
Advanced
Communications Checks
in this appendix or contact
your Davong dealer for assistance.
(Q
Copyright 1985 Davong Systems, [nco
8-3
Advertisement
Table of Contents
