Table of Contents
Advertisement
Setting Up
Follow these steps to connect the interface cable:
1.
Turn
off your Macintosh and any equipment
connected to it. For your safety, remove the AC
power cord from the
wall
outlet.
2.
Connect one end of the Mac Disk interface cable to
the modem or. printer connector on the back of your
Macintosh, as shown
in
Figure
2·1. It
does not
~tter
which end of the cable you connect to
Macintosh.
Figure
2-1.
Connecting Cable to Macintosh
<0 Copyright 1985 Oavong Systems, Inc.
Advertisement
Table of Contents
