Table of Contents
Advertisement
Appendix
A
Voltage
Settings and
Fuse Changes
You
may
need to change the voltage setting and fuse on
your Mac Disk if your power requirements are not
standard. Both of these tasks are quick and easy to
accomplish.
Davong shipped your Mac Disk
with
the
115
VAC
setting, for the standard United States outlet voltage. If
your voltage
is
115 VAe,
you may discard the additional
1.5
Amp fuse shipped
with
your Mac Disk and begin setting
up your hardware as instructed in Chapter
2.
Installations outside of the United States sometimes
require the 230
VAC
setting. If your voltage is 230
VAC,
you
must change the voltage switch setting and the fuse.
Discard the fuse shipped in your Nlac Disk, and remove
the
115 VAC
sticker from the back of your Mac Disk Wlit.
Do not use the power cord shipped with your Mac Disk.
Use a power cord that meets your electrical codes.
Contact your Davong dealer
if
you have any
questions about the COITect setting in your area.
Q
Copyright 1985 Oavong Systems. (nc.
:\-1
Advertisement
Table of Contents
