Demo Mode Function; Ordering Accessories Saeco - Saeco Incanto HD8911 User Manual

English
34
Problem
The AquaClean filter
icon does not appear
on the display after I
replaced the filter.
The AquaClean filter
is installed, but the
descaling message
appears.
The AquaClean filter
does not fit.
You need to remove
air from the filter.

Demo mode function

Ordering accessories Saeco

Cause
You did not confirm activation in
the machine menu.
You have not activated the
AquaClean filter in the machine
menu.
You need to remove air from the
filter.
There is still water in the water
tank.
You are trying to install another
filter than the AquaClean filter.
The rubber o-ring is not attached
to the AquaClean filter.
The machine is equipped with a demo mode function.
1 Press and hold the standby button for more than 8 seconds to
enter the demo mode function.
2 To exit the demo mode, turn the machine OFF and ON using the
main switch at the back of the machine.
To clean and descale the machine, only use the Saeco
maintenance products. These products can be purchased in
the Philips online shop (if available in your country)
at www.shop.philips.com/service, from your local reseller
or from the authorized service centers.
Solution
Confirm the activation of the
filter in the machine menu.
If the display shows 'START
CALC CLEAN', you first need
to descale the machine.
Remove the AquaClean filter
before descaling and reinsert it
afterwards.
First descale the machine and
then install a new AquaClean
filter. This will reset the filter
counter to 0/8. Always
confirm filter activation in the
machine menu, also after filter
replacement.
Let air bubbles come out of
the filter.
Empty the water tank before
you install the filter.
Only the AquaClean filter fits
into the machine.
Check the packaging for the
o-ring and attach it to the
AquaClean filter.