Coffee Brewing Circuit Rinsing; Aquaclean Filter; Activating The Aquaclean Filter - Saeco Incanto HD8911 User Manual

English
14
AROMA STRENGTH
GROUND COFFEE

AquaClean filter

AQUA CLEAN
FILTER
0 / 8

Coffee brewing circuit rinsing

1
Place a container under the coffee dispensing spout.
2 Press the AROMA STRENGTH button and select the pre-ground
coffee brewing function.
Note: Do not add pre-ground coffee in the pre-ground coffee
compartment.
3 Press the ESPRESSO LUNGO button.
-
The machine starts dispensing water from the coffee
dispensing spout.
4 Wait until the machine stops dispensing water and empty the
container.
5 Repeat steps 1 to 4 twice.
6 When the machine has returned to the main menu, empty the
container. The machine is ready for use.
The AquaClean filter is designed to reduce limescale deposits in
your coffee machine and provide filtered water to preserve the
aroma and flavor of each cup of coffee. If you use a series of 8
AquaClean filters as indicated in this user manual, you don't have to
descale your machine for up to 5000 cups.
Note: Your machine has to be completely limescale-free before
you start to use the AquaClean filter. If you did not activate the filter
during first installation, you need to descale the machine before
you activate the filter.

Activating the AquaClean filter

Note: Always confirm activation of the AquaClean filter in the
machine menu as described below. You also need to do this after
replacing the AquaClean filter. By activating the AquaClean filter
in the machine menu, the machine monitors the number of filters
used. When the filter has been replaced 8 times, the machine
reminds you to descale it.
1 For instructions on how to place the AquaClean filter in the water
tank, see the separate quick start guide.
Note: Shake the AquaClean filter for about 5 seconds, immerse it
upside down in a jug with cold water and wait until no more air
bubbles come out.
2 Press the MENU button, select MENU and press the OK button
to confirm. Scroll to AQUACLEAN FILTER. Press the OK button
to confirm.
-
The display shows the number of AquaClean filters that have
been installed previously from 0 to 8 filters.