Saeco Incanto HD8911 User Manual page 27

START
CALC
CLEAN
REMOVE
FILTER
2
1
CALC
CLEAN
1 Remove the drip tray and the coffee grounds container,
empty and clean them and put them back into place.
2 Remove the external part of the classic milk frother.
3 Place a large container (1.5 l) under the coffee dispensing spout
and the classic milk frother.
4 When the display shows START CALC CLEAN, press the OK
button to start the descaling procedure. Remove the hot water
dispensing spout if present.
-
The display reminds you that you have to remove the
AquaClean filter.
Note: You can press the escape button to skip descaling. If you
want to start the descaling procedure later, press the MENU
button, select MENU and scroll to select DESCALING. Press OK
to confirm.
5 Pour the descaling solution into the water tank. Fill the water
tank with fresh water up to the CALC CLEAN level indication.
Place the water tank back into the machine. Press the OK button
to confirm.
-
The first phase of the descaling procedure starts. The
machine starts dispensing the descaling solution at intervals.
-
The display shows the descaling icon, the phase indication
and the duration. This first phase takes 20 minutes.
6 Let the machine dispense the descaling solution until the water
tank is empty.
7 Remove the water tank and rinse it.
8 Fill the water tank with fresh water up to the CALC CLEAN
level indication. Place the water tank back in the machine and
press OK.
9 Remove and empty the container and place it back under the
coffee dispensing spout. Press OK to confirm.
10 The second phase of the descaling procedure starts, which is the
rinsing cycle. This phase takes 3 minutes. The display shows the
rinsing icon and the duration of the phase.
Note: If the water tank is not filled up to the CALC CLEAN level,
the machine may require another rinsing cycle.
11 Wait until the machine stops dispensing water. The descaling
procedure is finished when the tick appears on the display.
12 Press the OK button to exit the descaling procedure. The machine
starts heating upt and performs the automatic rinsing cycle.
13 Remove and empty the container.
14 Clean the classic milk frother after descaling.
15 Clean the brew group.
16 Install a new AquaClean filter in the water tank.
Tip: Using the AquaClean filter reduces the need for descaling!
English
27