Special Function Mode - Talea Giro And Odea - Saeco TALEA Service Manual

05 SERVICE MODALITY
5.1.2.

Special function mode - Talea Giro and Odea

• Press the start key and turn the appliance on at the same time. Keep the start key pressed
until all four LEDs fl ash in the following sequence
The following functions are no longer available with those appliances that are
installed with the automatic dosing regulation.
Rotary knob to
set cup capacity
Odea Go only
Odea Go only
Messages / Errors
Function
Brewing unit present - microswitch
Dreg drawer sensor
Hot water / steam valve sensor
Bean hopper cover sensor
Page 2 / 17
Function
Key
Let steam out
(approx. 2 min / hot
water / steam valve open)
Press the key to reduce
the dosing quantity
pulses by 5 pulses each
(setting range 60 - 150)
standard 80 -100
Press the key to increase
the dosing quantity
pulses by 5 pulses each
time.
(setting range 60 - 150)
standard 80 -100
Status
Switch not on
Sensor not on
Sensor not on
Sensor not on
TALEA / ODEA - LINE
(clockwise)
Display Comment
Flashing in
clockwise
sequence)
The LED lights
up when the key
is pressed.
If the value is at
the minimum,
Odea Go only
the LED no
longer lights
up or fl ashes
when pressed
(depending on
the model)
The LED lights
up when the key
is pressed.
If the value is at
the maximum,
Odea Go only
the LED no
longer lights
up or fl ashes
when pressed
(depending on
the model)
Signal Display
lit
lit
lit
lit
Saeco Internationa Group