Manual Rinsing Cycle; Hot Water Circuit Rinsing - Saeco Incanto HD8911 User Manual

STRENGTH

Manual rinsing cycle

-
The display shows the circuit priming icon to indicate that
you have to prime the circuit.
8 Place a container under the classic milk frother. Press the OK
button to start the water circuit priming cycle.The machine starts
dispensing hot water.The display shows the priming icon. The
progress bar shows the progress of the priming cycle.
9 The machine heats up and the display shows the temperature
icon.
10 Empty the container and place it under the coffee dispensing
spout.
11 The machine starts rinsing water through the coffee dispensing
spout. The display shows the rinsing icon and a progress bar.
Note: Do not interrupt the rinsing cycle.
The machine is now ready for use.
During the manual rinsing cycle, fresh water flows through the water
and coffee brewing circuit. This takes a few minutes.

Hot water circuit rinsing

1 Place a container under the classic milk frother.
2 Press the HOT WATER button.
-
The machine starts dispensing hot water.
Note: To interrupt the rinsing cycle, press the OK button.
3 When the machine has dispensed 2 cups of hot water (0.5 l),
press the OK button to stop the hot water dispensing. Repeat
steps 1 to 3 twice.
English
13