Cleaning The Water Tank; Cleaning The Bean Hopper; Cleaning The Brew Group And The Coffee Exit Duct; Weekly Cleaning Of The Brew Group - Saeco Incanto HD8911 User Manual

English
22
1
2

Cleaning the water tank

Cleaning the bean hopper

Cleaning the brew group and the coffee exit duct

1
2
1 Turn the classic milk frother to the left.
2 Press the release buttons on both sides of the drip tray (1) and
pull the drip tray out of the machine (2).
3 Remove and empty the coffee grounds container.
4 Empty and rinse the drip tray under the tap.
1
5 Place the coffee grounds container back in the drip tray.
6 Slide the drip tray back into the machine until it locks into
position with a click.
Note: Make sure that the machine is still switched on when you
remove the drip tray. If you switch off the machine before you
remove the drip tray, the 'empty coffee grounds container' icon will
be visible on the display when you switch on the machine again,
even though the drip tray is empty.
1
Remove the water tank from the machine and rinse it with fresh
water periodically.
2 Fill the water tank with fresh water up to the MAX level indication
and place it back in the machine.
Clean the bean hopper with a dry cloth once a month.

Weekly cleaning of the brew group

1
Turn off the machine and unplug it.
2 Remove the drip tray with the coffee grounds container.
3 Empty the drip tray and rinse it under running water.
4 Empty the coffee grounds container and rinse it under lukewarm
running water.
5 Open the service door.
6 Press the PUSH button (1) and pull at the grip of the brew group
to remove it from the machine (2).