Installation Of Software Driver; Ezsensor Classic(Ios-U20Vb, Ios-U15Vb, Ios-U10Vb)Driver Setup - Vatech EzSensor Classic Installation & User Manual

3.2

Installation of Software Driver

Installation of Software Driver
To operate the intraoral sensor, you need to install the To operate the intraoral sensor, you need to install the EzSensor Classic
Driver.
This Product should be connected with the product
complied with IEC60601 complied with IEC60601-1
EzSensor Classic( IOS-U20VB, IOS-U15VB, IOS-U10VB) Driver Setup
3.2.1 EzSensor Classic
This step is necessary for the
Calibration data for the EzSensor Classic
Windows device driver. A Twain driver is also installed . A Twain driver is also installed during this step.
Step 1
Insert the S/W Installation CD in Installation CD in
the CD-ROM. Setup should start Setup should start
automatically.
If it does not, click Start>Run
and type
Homedirctory:\Console\setup.exe
Step 2
The install program for 'IntraOral
USB-Sensor Acquisition
Software' will appear. Click the will appear. Click the
'Next' button.
should be connected with the product or the device
for the installation of EzSensor Classic. Capturing software and
EzSensor Classic will be installed and downloaded
setup.exe
IntraOral
10
EzSensor Classic
or the device which is
Driver Setup
Capturing software and
and downloaded along with the