Commissioning - Swegon GLOBAL PX Operation And Maintenance Instructions

6.0 Commissioning

As a human machine interface (HMI), several options are available. The HMI will enable access to the control parameters
in the integrated controller. The HMI as such does not contain any programming and therefor is not mandatory.
The possible HMIs are:
Operation and maintenance instructions – v2.8.8 & 2.7.3
TACtouch touchscreen - CID3 72 096
This 4.3" touchscreen display is used when there is a need for
a graphical HMI. The Touchscreen touchscreen is a complete
graphic monitoring system where the screens are designed to be
intuitive and complete, ensuring a userfriendly experience.
Position switch (COM4) - CID010007
The most basic interface to control a GLOBAL air handling unit
is the 4 position swich. This swith will allow to control the unit
to its three configured airflow (low, medium and high) and as
a fourth position, the unit is switched off.
Application Eole
An application for Windows, Android and iPhone is available.
In order to connect to the AHU, a SAT Ethernet or SAT Wifi is
mandatory.
23