Cisco 6000 Series Configuration Manual page 87

Configuring Link Bundling
Command or Action
RP/0/RP0/CPU0:router(config-if)# bundle
port-priority 2
Example:
RP/0/RP0/CPU0:router(config-if)# no shutdown
Example:
Example:
RP/0/RP0/CPU0:router(config-if)# exit
Example:
Example:
RP/0/RP0/CPU0:router(config)# interface TenGigE
1/0/2/3
Example:
Example:
RP/0/RP0/CPU0:router(config-if)# bundle id 3
Example:
Example:
RP/0/RP0/CPU0:router(config-if)# no shutdown
Example:
Example:
RP/0/RP0/CPU0:router(config-if)# exit
Step 15
Do one of the following:
• end
•
• commit
Example:
RP/0/RP0/CPU0:router(config-if)# end
Example:
Example:
Interface and Hardware Component Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
Configuring Ethernet Link Bundles
Purpose
Saves configuration changes.
• When you issue the end command, the system
prompts you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
• • Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to XR EXEC
mode.
75