How To Configure Link Bundling - Cisco 6000 Series Configuration Manual

Configuring Link Bundling
254
0
255
255
47
0
1226
866
240
1131
0
526
1243
264

How to Configure Link Bundling

This section contains the following procedures:
Configuring Ethernet Link Bundles
This section describes how to configure an Ethernet link bundle.
Note MAC accounting is not supported on Ethernet link bundles.
Note
In order for an Ethernet bundle to be active, you must perform the same configuration on both connection
endpoints of the bundle.
SUMMARY STEPS
1.
2.
3.
Interface and Hardware Component Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
4.942
0
4.961
4.961
0.914
0
23.853
16.849
4.669
22.005
0
10.234
24.187
5.136
configure
interface Bundle-Ether bundle-id
ipv4 address ipv4-address mask
Egress
Egress
Egress
Egress
Egress
Egress
Ingress
Ingress
Ingress
Ingress
Ingress
Ingress
Ingress
Ingress
How to Configure Link Bundling
71