HearthStone CELESTE 60 Owner's Manual page 23

Hearthstone Quality Home Heating Products, Inc
PLACING THE BURNER GLASS MEDIA
The burner glass media poly-bag that you set aside when you unpacked the fireplace contains the correct
amount of glass material to cover the burner. DO NOT add any additional media to the media supplied with your
fireplace. The entire contents of the bag should be evenly distributed over the burner tray.
1. Locate the burner in the fireplace. Refer to the
adjacent illustration.
1. Carefully clip one corner of the poly-bag to form a
pouring spout. The opening should be large enough
to allow the glass media to flow but not so large that
you can't control the flow.
2. You will notice that the burner surface is designed
with turned-up edges that form a tray to hold the
glass media.
3. Starting at one end, pour the glass media onto the
burner tray, keeping the pouring spout on the poly-
bag toward the center of the burner to avoid spillage
of glass pieces over the sides of the burner. See the
adjacent illustrations.
4. Once you have poured all of the glass burner media
into the burner tray, carefully smooth the glass
pieces out so they have a uniform depth over the
entire surface of the burner. When the burner glass
media is properly placed, it should look like the
adjacent illustrations.
Note: If a few pieces of glass escape over the edges of the
burner tray during installation, it is not a problem. They will
simply land in the area below the burner and will do no
harm.
CELESTE/GEMINI 48/60/72 Models 8930/8935/8940/8945/8950/8955
23