Final Assembly - HearthStone CELESTE 60 Owner's Manual

Series 8930, 8935, 8940, 8945, 8950, and 8955 built-in direce vent gas fireplaces
Table of Contents

Advertisement

Hearthstone Quality Home Heating Products, Inc
SCREEN REMOVAL:
4.
Lift up on the lower air panel to remove it from
the fireplace opening then carefully lift up on
and remove the left and right side panels.
5. The fireplace screen is held in place by 3 self-
tensioning latches along its top edge (4 latches
on the 72 inch models). Release these latches
to remove the screen.

FINAL ASSEMBLY

CELESTE/GEMINI 48/60/72
Models 8930/8935/8940/8945/8950/8955
1.
Allow the screen to rest in the fireplace
opening, confirm that the latches are in
their "home" position.
3. Lift the screen up so that the bottom of
the screen clears the bottom of the
fireplace opening.
2. Angle the screen toward you from the
bottom to remove.
To reinstall the screen, reverse these steps.
Remember to confirm the latches are in their
"home" position any time you are installing or
removing the screen.
NOTICE: If the screen is removed for
servicing this appliance it must be replaced
prior to operating the appliance.
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gemini 60Gemini 48Celeste 48Celeste 72Gemini 72

Table of Contents