Target Audience, Prerequisites; Glossary - Siemens RDF301 Basic Documentation

ETS
ACS
Note!
STOP
8 / 94
Siemens
Building Technologies
1.5

Target audience, prerequisites

Target audience, prerequisites
This document assumes that users of the RDF This document assumes that users of the RDF KNX thermostat
the ETS and/or Synco ACS and/or Synco ACS tools and able to use them.
It also presupposes that these users are aware of the specific conditions associ- It also presupposes that these users are aware of the specific conditions associ It also presupposes that these users are aware of the specific conditions associ
ated with KNX. ated with KNX.
In most countries, specific KNX know In most countries, specific KNX know-how is conveyed through training centers
certified by the certified by the KNX Association (see www.knx.org/).
For reference documentation, see section reference documentation, see section 1.2.
1.6

Glossary

Glossary
The inputs, outputs and parameters of an application can be influenced in various The inputs, outputs and parameters of an application can be influenced in various The inputs, outputs and parameters of an application can be influenced in various
ways. These are identified by the following symbols in this document ways. These are identified by the following symbols in this
Parameters identified by this symbol are set using Parameters identified by this symbol are set using ETS.
Parameters identified by this symbol are set using the ACS tool. Parameters identified by th
Setting RDF KNX parameters is only supported by the following tool Setting RDF KNX parameters is only supported by the following tool Setting RDF KNX parameters is only supported by the following tool
versions:
– ETS3 or or higher
– ACS version 5.11 ersion 5.11 or higher
Inputs and outputs identified by this symbol Inputs and outputs identified by this symbol communicate with other KNX devices.
They are called communication objects (CO). They are called communication objects (CO).
The communication objects of the RDF KNX thermostats work The communication objects of the
partly in LTE Mode LTE Mode, and partly in both. These objects are described accordingly.
A list of the parameters is shown in section A list of the parameters is shown in section 3.13.
RDF301, RDF301.50..., RDF600KN RDF301, RDF301.50..., RDF600KN, RDF600KN/S
thermostats are familiar with
the ACS tool.
communicate with other KNX devices.
thermostats work partly in S-Mode,
in both. These objects are described accordingly.
Basic Documentation ocumentation
through training centers
document:
CE1P3171en
2017-12-07