Vacon 20 CP/X Applications Manual page 75

Parameter description
3.11.1.2 Fieldbus Data OUT: Slave ->Master
Modbus
register
2101 Status word(*)
2102 General Status word
2103 Actual speed(*)
2104 Fieldbus Data OUT 1
2105 Fieldbus Data OUT 2
2106 Fieldbus Data OUT 3
2107 Fieldbus Data OUT 4
2108 Fieldbus Data OUT 5
2109 Fieldbus Data OUT 6
2110 Fieldbus Data OUT 7
2111 Fieldbus Data OUT 8
Table 26. (*) Modbus data outputs. They can vary depending on fieldbus used (See
specific fieldbus option board installation manual).
Notes:
• Fieldbus different from Modbus have their own Status Word (see manual of the specific
fieldbus board).
Service support: find your nearest Vacon service center at www.vacon.com
Name Description
Drive state
Drive state
Actual speed
Programmable
Programmable
Programmable
Programmable
Programmable
Programmable
Programmable
Programmable
vacon • 72
Range
Binary coded:
b0: Ready
b1: Run
b2: Reverse
b3: Fault
b4: Warning
b5: Freq. reference reached
b6: Zero speed
As Status word and:
b7: Control place is fieldbus
0...10000 as 0,00...100,00%
of Min freq. - Max freq.
range
See P11.1
See P11.2
See P11.3
See P11.4
See P11.5
See P11.6
See P11.7
See P11.8
3