Vacon 20 CP/X Applications Manual page 56

vacon • 53
Possible delays for ON/OFF transitions.
P5.9
P5.12
These parameters are visible only when an expansion board with outputs is installed (to see
table below). Relays are available on boards OPT-B2, B5, B9 and BF.
Digital outputs are available on board OPTB1, if less than 6 terminals are used as inputs, and
on OPTBF.
P5.12 is visible only when expansion boards OPTBF or OPTBK are installed.
When OPTBK board is installed, parameters define the meaning of ASi Inputs 1-4.
P5.9 EO1
P5.10 EO2
P5.11 EO3
P5.12 EO4
3
TO
E EO1, EO2, EO3, EO4
XPANSION
OPTB1 OPTB2
visible if P2.24 < 4 visible
digital out termi- relay termi-
nal 5 nals 21-22-23
visible if P2.24 < 5 visible
digital out termi- relay termi-
nal 6 nals 25-26
visible if P2.24 < 6
digital out termi- -
nal 7
- -
Table 22. Digital outputs available with OPTB-boards
Parameter description
OUTPUT CONTENT
OPTB5 OPTB9
visible visible
relay termi- relay termi-
nals 22-23 nals 7-8
visible
relay termi- -
nals 25-26
visible
relay termi- -
nals 28-29
- -
OPTBF OPTBK
visible
visible
relay termi-
ASi bit 1
nals 22-23
visible
-
ASi bit 2
visible
-
ASi bit 3
visible
visible
digital out
ASi bit 4
terminal 3