Charging with a PC
To charge the terminal by connecting to a PC,
USB cable A to C 01 (optional) is required.
Insert a Type-C plug of the USB
1
cable A to C horizontally into the
USB Type-C jack of the terminal.
Insert a USB plug of the USB cable
2
A to C to a USB port of a PC.
When charging starts while the power
・
is on, a sound to indicate the start of
charging is heard, and the notification
LED of the terminal turns on (P.52).
If the installation screen for the
・
terminal's driver software appears on
your PC, please wait a moment for the
installation to complete.
When the confirmation screen of
・
installing software appears on the
terminal, tap [SKIP] or [CANCEL].
When the "Use USB to" confirmation
・
screen appears, tap [CANCEL].
When charging is complete,
3
remove the USB plug of the USB
cable A to C from the USB port of
the PC and then remove the Type-
C plug horizontally from the
terminal.
❖ Note
Do not connect the Type-C plug of the USB cable A
・
to C forcibly. Wrong connection may cause damage.
Before Using the Terminal
43