Making pair setting for the
terminal and Bluetooth device
To connect the terminal and Bluetooth
device, pair them first.
Once paired, the setting with the Bluetooth
・
device is saved.
For make pair setting, entering passcode (PIN)
・
may be required. Passcode (PIN) of the
terminal is "0000". If you cannot make pair
setting when you enter "0000", see the
documentation of your Bluetooth device.
Make sure that the Bluetooth function and
・
Bluetooth detection function of the target
device are on in advance.
From the Home screen,
1
u
[Settings]
u
connection]
Detected Bluetooth device names are
・
displayed in "Available devices".
Tap a name of Bluetooth device for
2
pairing.
Confirm the Bluetooth pairing
3
code (pass code) on the
confirmation screen
Paired Bluetooth device names are
・
displayed in "Paired devices".
u
[Device
[Bluetooth].
u
[PAIR].
When pairing request is sent from a
■
Bluetooth device
Confirm the Bluetooth pairing code (pass
code) on the confirmation screen and then
tap [PAIR].
❖ Information
To rename the other party's Bluetooth device or set
・
the use purpose to the device, tap
Bluetooth device name.
To unpair, tap
for the Bluetooth device to be
・
u
unpaired
[FORGET].
Connecting the terminal with a
Bluetooth device
From the Home screen,
1
u
[Settings]
u
connection]
Tap a name of Bluetooth device to
2
connect.
❖ Information
Up to 7 devices can be connected at the same time.
・
Depending on profile, operation may not be correct
or number of devices that can be connected at the
same time may be different.
of paired
u
[Device
[Bluetooth].
Data communication
202