Sony XPERIA XZ2 Instruction Manual page 42

Switching normal charging
■
From the Home screen,
･
u
[Battery] [Battery Care]
off Battery Care.
To temporarily stop Battery Care charging
･
and switch to normal charging, drag the
status bar down and tap the notification
of Battery Care charging.
❖ Note
It may take 7 days or more to complete learning your
･
habit.
If regularity in your charging habit cannot be found,
･
Battery Care does not start because incomplete of
the learning and normal charging will be performed.
If you remove charging equipment during Battery
･
Care charging, the terminal may not be fully charged.
Charging with desktop holder
To charge the battery using the Desktop
Holder SO27 (optional) and AC Adapter 06
(optional), operate the following steps.
Depending on the thickness of the terminal,
･
please install the attachment that was
included with the desktop holder before
charging. Placing the terminal on the desktop
holder without the attachment on it may
damage the USB Type-C jack or other parts.
When you do not attach a commercially
･
available case or cover to the terminal, attach
the Attachment 52B (P.41) to the desktop
holder to use.
u u
[Settings]
u
Tap to turn
Insert a Type-C plug of the AC
1
adapter into the charging jack on
the back of the desktop holder.
Unfold the power plug of the AC
2
adapter and insert it into a power
outlet. Then place the terminal on
the desktop holder.
When charging starts while the power
･
is on, a sound to indicate the start of
charging is heard, and the notification
LED of the terminal turns on (P.52).
Check the position of the USB Type-C
･
jack of the terminal and then insert it
horizontally to the Type-C plug of the
desktop holder.
Before Using the Terminal
40