Sony XPERIA XZ2 Instruction Manual page 225

Data management
■
Data transfer is not performed.
Check if USB hub is used. If you use USB
･
hub, operations may not be performed
correctly.
Data saved in microSD card is not
displayed.
Remove and reinsert the microSD card.
･
P.35
" " or " " appears when displaying
images, or " " or " " appears for the
demo play or the preview function.
" "/" " may appear instead of
･
destroyed image data.
Bluetooth function
■
The terminal cannot be connected to a
Bluetooth device/A Bluetooth device
cannot be found by search.
Allow Bluetooth device (commercially
･
available) to be detectable and then make
pairing with the device on the terminal. If
you want to cancel a paired device and
then make the pair setting again, cancel
the pair settings on both the terminal and
the Bluetooth device (commercially
available). P.202
→
Calls cannot be made from the terminal
connecting to external device such as car
navigation or handsfree device.
If calls are made several times when the
･
other party does not answer or is out of
service, the call to this number may be
disabled. In this case, turn terminal off and
on.
→
External device connection
■
An external device connected using USB
cable A to C etc. is not recognized.
Reconnect the external device.
･
However, some devices may not be
detected.
Map/GPS
■
Cannot set AUTO-GPS service
information.
Check if the battery level is low and AUTO-
･
GPS function stops.
If AUTO-GPS stops due to "Low-power
operation settings", AUTO-GPS service
information cannot be set. In this case, set
"Low-power operation settings" to "Not
suspend" or charge the battery.
P.189
Check if "AUTO-GPS operation settings" is
･
marked.
→
P.189
Appendix/Index
P.38,
→
223