Sony XPERIA XZ2 Instruction Manual page 168

Setting Billing cycle
Set the billing period (measuring period) of
mobile data usage amount, or the warning
volume or the upper limit of mobile data
usage.
From the Home screen,
1
u
[Settings]
u
Internet] [Data usage].
[Billing cycle].
2
Billing cycle Set the billing period
(measuring period) of mobile
data usage.
Set data warning Set whether to display the
notification when the mobile
data usage reaches to the set
warning volume.
Data warning Set a warning volume of mobile
data usage.
Set data limit Set whether to temporarily stop
the mobile data
communication when the
mobile data usage reaches to
the limit volume.
Data limit Set a limit of mobile data usage.
u
[Network &
❖ Information
Displayed mobile data usage volume is an estimate.
･
It may be different from the actual one. You can
check your actual mobile data usage volume in My
docomo.
Note that the mobile data communication will
･
suspend when mobile data usage volume reaches to
the set limit volume.
To resume the mobile data communication, on the
suspension notification screen, tap [RESUME]. If the
suspension notification screen does not appear, drag
u
the status bar down
Tap [RESUME].
Using tethering function
Use tethering function to enable the terminal
to use as modem to allow USB compatible
devices, wireless LAN devices or Bluetooth
devices to access the Internet.
❖ Information
If you want to use tethering, subscription to Packet
･
Pack/packet flat-rate service is strongly
recommended.
Tethering function is not available when the docomo
･
nano UIM card is not inserted, mobile data
communication is disabled, or use of mobile network
is not available due to out of service area.
[Mobile data limit reached]
Settings
u
166