From The Home Screen, [Settings]; Mobile Network - Sony XPERIA XZ2 Instruction Manual

Setting an access point
An access point for connecting to the
Internet (sp-mode) is already registered. You
can add or change it if necessary.
For details of sp-mode, refer to NTT DOCOMO
website.
https://www.nttdocomo.co.jp/service/
spmode/ (in Japanese only)
For using mopera U and Business mopera
Internet, add the access point manually.
For details on mopera U, refer to mopera U
website.
https://www.mopera.net/ (in Japanese only)
Checking the access point in use
From the Home screen,
1
u
[Settings]
u
Internet]

[Mobile network]

[Access Point Names].
The radio button on the right of current
･
access point is marked.
u
[Network &
u
Setting an access point additionally
From the Home screen,
1
u
[Settings]
u
Internet] [Mobile network]
[Access Point Names].
Tap .
2
To edit the access point, tap the access
･
point.
u
[Name] Enter a name
3
u
[APN] Enter an access point name
4
u
[OK].
Tap and enter all other
5
information required by your
network operator.
u
[Save].
6
❖ Information
Do not change the MCC/MNC. If you change them to
･
the values other than the default (440/10), the access
point will not be displayed on the APN screen. If the
set access point is not displayed,
[Reset to default] or
again.
It is recommended that you use the access point that
･
is registered by default as it is.
u
[Network &
u
u
[OK].
u
in Step 2
, then set the access point
Settings
Tap
164