DSC LE4000 Installation Manual page 8

LE4000 Installation Manual
Red
FLASH ON
OFF
OFF
OFF
OFF
OFF
FLASH ON
Once this is completed, the LE4000 will move to Step 4.
Step 4 - Acquire C24 Communications Programming
The red LED will be on solid and the blue LED will flash. The flashing of the blue LED indicates that the LE4000 has requested pro-
gramming from C24 Communications and is waiting for a response.
Red
ON
Once remote programming is completed, the blue LED will switch to solid and the LE4000 will move to Step 5.
Step 5 – Receiver Initialization
The red LED and the blue LED are both solid and the signal strength LEDs are off.
Red
ON
When the LE4000 sends a request to communicate with the central station, the top signal strength LED will begin flashing.
Red
ON
When the central station communicates back with the LE4000, the top signal strength LED will turn on solid.
Red
ON
When the LE4000 sends a request to communicate with the next central station, the bottom signal strength LED will begin flashing.
Red
ON
When a signal is reveived back from the central station, The bottom signal strength LED turns on solid.
Red
ON
Blue
OFF
FLASH ON
OFF
OFF
OFF
FLASH ON
OFF
Blue
FLASHING
Blue
ON
Blue
ON
Blue
ON
Blue
ON
Blue
ON
8
Blue/Green (Top)
OFF
OFF
FLASH ON
OFF
FLASH ON
OFF
OFF
Blue/Green (Top)
-
Blue/Green (Top)
OFF
Blue/Green (Top)
FLASHING
Blue/Green (Top)
ON
Blue/Green (Top)
ON
Blue/Green (Top)
ON
Blue/Green (Bottom)
OFF
OFF
OFF
FLASH ON
OFF
OFF
OFF
Blue/Green (Bottom)
-
Blue/Green (Bottom)
OFF
Blue/Green (Bottom)
OFF
Blue/Green (Bottom)
OFF
Blue/Green (Bottom)
FLASHING
Blue/Green (Bottom)
ON