DSC LE4000 Installation Manual page 17

2. Via C24 Communications, program the phone number and access code used for SMS command and control.
Up to 6 different phone numbers can be programmed to perform SMS command and control.
l
The password can be 4 to 8 alphanumeric characters and is not case sensitive.
l
The SMS command and control can be sent in the following format:
For arming/disarming the security panel
Arm <access code>, example Arm 12345678
For activating/deactivating a specific PGM
Activate <PGM #> <access code>, Activate 1 12345678
The following SMS command and control operations are available.
Arming
Language Command Label (shall not be case sensitive)
English Arm
French Armement
Spanish Armado
Disarming
Language Command Label (shall not be case sensitive)
English Disarm
French Desarmement
Spanish Desarmado
Activate PGM
Language Command Label (shall not be case sensitive)
English Activate
French Activation
Spanish Activar
Deactivate PGM
Language Command Label (shall not be case sensitive)
English Deactivate
French Desactivation
Spanish Desactivar
Status Request
Language Command Label (shall not be case sensitive)
English Status Request
French Etat Démandé
Spanish Petición de Estado
Invalid command is sent when no zones are programmed to read security arm status.
17
6.11.2 Remote Control of PGM