Step 4, Connect Power; Step 5, Install Filters, Check Operation; Cleaning - Monogram ZVB36 Installation Instructions Manual

4
• Plug power cord into properly grounded
Step
Connect
Power
5
Step
Install Filters,
Check
Operation
Cleaning the Stainless Steel Downdraft Vent

Cleaning

Stainless steel has some unique cleaning
characteristics. In order to keep you vent
looking like new, we suggest cleaning it with
Stainless Steel Magic or a similar product.
Stainless Steel Magic is available at Ace, True
Value, Servistar, HWI and other leading
stores. It is also available through GE Parts by
calling 1-800-626-2002. Order part number
WX10X15.
16
receptacle.
To raise the vent, press the RAISE/LOWER
switch.
– On 30" models, the switch is located on the
top right side of the vent.
– On 36" models, the switch is installed in a
separate location.
• Tip filter into the opening and pull straight
down so that the filter rests on slides.
• Slide the filter to the right side.
• Tip the other filter into the opening and
pull straight down.
• To turn the fan on, slide control to HIGH.
– Select desired speed by sliding control
between HI and LO settings.
Note: It is not necessary to turn the fan OFF
before lowering the vent. The fan will auto-
matically turn off when the vent is lowered.
When the fan is not turned off before lower-
ing the vent, it will automatically come on at
the previously set speed when the vent is fully
raised.
To lower the vent, press the RAISE/LOWER
switch and hold until the vent begins to lower.
Installation
Downdraf t Vent Systems