Step 4 Connect Power; Step 5 Install Filters, Check Operation; Cleaning - Monogram ZVB36 Installation Instructions Manual

STEP 4 CONNECT POWER

Plug power cord into properly grounded receptacle.
STEP 5 INSTALL FILTERS,
CHECK OPERATION
To raise the vent, press the RAISE/LOWER switch.
The switch is installed in a separate location.
• Tip fi lter into the opening and pull slide straight down
so that the fi lter rests on the inside fi lter supports.
• Install the opposite fi lter.
• To turn the fan on, slide control to HIGH. Select
desired speed by sliding control between HI and
LO settings.
Note: It is not necessary to turn the fan OFF before
lowering the vent. The fan will automatically turn off
when the vent is lowered. When the fan is not turned
off before lowering the vent, it will automatically come
on at the previously set speed when the vent is fully
raised.
To lower the vent, press the RAISE/LOWER switch
and hold until the vent begins to lower.
Installation Instructions
16

CLEANING

Cleaning a Stainless Steel Downdraft Vent
Stainless steel has some unique cleaning
characteristics. In order to keep your vent looking like
new, we suggest cleaning it with Stainless Steel Magic
or similar product.
Stainless Steel Magic is available at Ace, True Value,
Servistar, HWI and other leading stores. It is also
available through GE Parts by calling 1.800.626.2002.
Order part number WX10X15.