Installation Preparation - Monogram ZVB36 Installation Instructions Manual

• Measure carefully when cutting the
Cutouts and
Clearances
• Measure to be sure there is room for
• Refer to cooktop installation instructions
ZEU769
Electric Cooktops
with 36" Vent
Countertop Cutout: Requires 22-1/2" flat countertop
surface and 24-3/8" total countertop depth.
Cabinet: Requires 22-1/2" inside cabinet depth.
– Remove rear support rail.
6
countertop. Make sure sides of the opening
are parallel and rear and front cuts are
exactly perpendicular to sides.
clearances to the front edge of the
countertop.
to be sure that models fit into the base
cabinets being used.
36"
21-3/4"
Cutout
34" Cooktop and Vent Cutout
Depth
5/8" Cooktop Overlap
2-1/2" Min. Clearance to Cutout
Front Edge
of Countertop

Installation Preparation

• Identify the cutout illustration for the
cooktop model you are installing.
– Draw lines on the countertop to follow as a
cutting guide. Measure and mark cooktop
and vent overlaps to be sure there is
enough flat countertop depth.
1-3/4" Min. Cooktop Cutout to Rear
Vertical Combustible Surface
1/4" Overlap
1/8" Gap
22-1/2"
Total Flat
Surface
Required
2" Min. Cutout
to Side Walls
2-1/2" to
Cutout
22-3/4" to Back Wall
Downdraf t Vent Systems
1-7/8"
ZEU769 Cooktop
3/4"
19-7/8"
Thick
Support
3/4"
Rail
DOWNDRAFT VENT
22" to Support Rail
24-3/4"