RF Technology Safe Place Smart Sense User Manual page 22

General Information
Page 20 of 36
5. Guide the banding material through until
it bumps against the stop.
6. Push in the clamp until it snaps into
place.
7. Insert the banding material through the
slot on the locking clamp side of the
transmitter, from bottom to top.
8. Guide the banding material through the
slot at the top of the clamp. DO NOT
snap the clamp into place.
9. Slide the transmitter and banding
material onto the ankle or wrist of a
patient according to your facility's
policies and procedures.
10. Adjust the band so that the transmitter
is in a comfortable position on the
patient.
Safe Place Transmitters User Guide
0510-1121-G