RF Technology Safe Place Smart Sense User Manual page 18

General Information
Page 16 of 36
5. Close the second clamp. The transmitter
becomes active one minute after the
clamps are snapped into place. The 60
second grace period allows the
transmitter to be re-opened once the
transmitter's second clamp has been
secured.
6. Remove the plastic guide tabs and
discard.
7. Use safety scissors to cut off the excess
banding material. Try not to cut bands
too short to allow room to adjust in the
future.
When it is time for an infant to leave your
facility, he/she must be discharged from the
software (refer to the applicable Series User
Guide).
To discharge the Smart Sense transmitter:
1. Assure that clamps are firmly closed on
both sides with banding material in
place.
2. Check census screen to confirm that the
transmitter to be discharged is
communicating with the system
(indicated by Monitored displayed in
transmitter Status column).
Safe Place Transmitters User Guide
0510-1121-G