RF Technology Safe Place Smart Sense User Manual page 19

Safe Place Transmitters User Guide
0510-1121-G
3. Tend to and clear any alarms displayed
on the screen for the transmitter being
discharged.
4. Request a discharge function for the
transmitter and complete the action
within the allotted time specified in the
software by your facility.
5. Open the Smart Sense transmitter
clamps to remove the banding material.
CAUTION: Do not slip the banding material
off the infant's extremity; doing so may
result in a Band Off alarm.
CAUTION: Do not leave the banding
material in the Smart Sense transmitter
clamps after discharge; doing so may result
in the transmitter re-enrolling.
6. Discard the used banding material (refer
to the Disposal caution in the Important
Warnings section of this guide).
7. Finally, the transmitter must be
disinfected in order to be ready to be
used again.
General Information
Page 17 of 36