Moxa Technologies UC-8580-LX Quick Installation Manual
Uc-8580 series
Hide thumbs
Also See for UC-8580-LX:
- Hardware user manual (22 pages) ,
- Quick installation manual (13 pages)
Table of Contents
Advertisement
Quick Links
Quick Installation Guide
Moxa Americas:
Toll-free: 1-888-669-2872
Tel:
1-714-528-6777
Fax:
1-714-528-6778
Moxa Europe:
Tel:
+49-89-3 70 03 99-0
Fax:
+49-89-3 70 03 99-99
Moxa India:
Tel:
+91-80-4172-9088
Fax:
+91-80-4132-1045
UC-8580 Series
Edition 1.0, July 2017
Technical Support Contact Information
www.moxa.com/support
2017 Moxa Inc. All rights reserved.
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel:
+86-21-5258-9955
Fax:
+86-21-5258-5505
Moxa Asia-Pacific:
Tel:
+886-2-8919-1230
Fax:
+886-2-8919-1231
P/N: 1802085800010
*1802085800010*
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Moxa Technologies UC-8580-LX
Summary of Contents for Moxa Technologies UC-8580-LX
-
Page 1: Quick Installation Guide
UC-8580 Series Quick Installation Guide Edition 1.0, July 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Moxa China (Shanghai office): Toll-free: 1-888-669-2872 Toll-free: 800-820-5036 Tel: 1-714-528-6777 Tel: +86-21-5258-9955 Fax: 1-714-528-6778 Fax: +86-21-5258-5505 Moxa Europe: Moxa Asia-Pacific: Tel: +49-89-3 70 03 99-0 Tel: +886-2-8919-1230 Fax:... -
Page 2: Model Names And Package Checklist
802.11b/g/n/ac and LTE data collection and transmission. Model Names and Package Checklist The UC-8580 Series includes the following models: Available Models Operating Temperature Conformal Coating UC-8580-LX -25 to 55°C (-13 to 131°F) – UC-8580-T-LX -40 to 70°C (-40 to 158°F) –... -
Page 3: Led Indicators
LED Indicators Refer to the following table for the LED indicator definitions. LED Name Status Function Green Power is on No power input or any other power error Green System is ready System is booting up, OS boot up failure, or any other system initialization error Ethernet Green... -
Page 4: Connecting The Power
Wiring Requirements Be sure to read and follow these common safety precautions before proceeding with the installation of any electronic device: • Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must cross, make sure the wires are perpendicular at the intersection point. -
Page 5: Grounding The Unit
Grounding the Unit Grounding and wire routing help limit the effects of noise due to electromagnetic interference (EMI). Run the ground connection from the ground screw to the grounding surface prior to connecting the power. Please note that this product is intended to be mounted on a well-grounded mounting surface, such as a metal panel. -
Page 6: Connecting A Serial Device
Connecting a Serial Device Use a serial cable to connect your serial device to the computer’s serial port. Serial ports P1 and P2 use terminal blocks and can be configured for RS-232, RS-422, or RS-485 communication. The pin location and assignment are shown in the following diagrams: RS-232 RS-422... -
Page 7: Connecting A Usb Device
Connecting a USB Device The UC-8580 computer is provided with a USB 3.0 port on the front panel for connecting a USB device. Connecting the Wi-Fi/Cellular Module and Antenna The UC-8580 computer is provided with four sets of antenna holes for installing antennas for the Wi-Fi and cellular modules. - Page 8 You will need to install the SIM cards for the cellular modules in the designated SIM-card slots. For the cellular module in socket 1, insert SIM cards in the SIM 1-1 and SIM 1-2 slots. The SIM cards for the cellular module in socket 3 should be inserted in the SIM 3-1 and SIM 3-2 slots.
- Page 9 3. Attach the flat end of the antenna cable to the connector marked MAIN on the module and insert the other end of the cable with the connector tube into the antenna hole marked MAIN on the front panel of the computer. Remove the black cover on the antenna hole before you do so and insert the connector tube through the back side of the front...
-
Page 10: Installing Sim Cards
6. Connect the antennas to the connectors on the front panel. Refer to the following figure for the specific location of each antenna connector, including a connector for a GPS antenna. Use the procedure described above to install other Wi-Fi or cellular modules. -
Page 11: Installing The Msata Module
3. Push down the SIM-card holder until the SIM card is secured in place. Installing the mSATA Module The UC-8580 computer is provided with one storage socket for installing an mSATA module. To install the mSATA module, do the following: 1.
Need help?
Do you have a question about the UC-8580-LX and is the answer not in the manual?
Questions and answers