© Panduit Corp. 2018
TECHNICAL DATA
Main power supply ................................................................................. 120 VAC / 60 Hz
Input Current ........................................................................................................... 0.55A
Working range ................................................................ #20 – #14 AWG (0,5 – 2,5 mm
Ferrules ...................................................................... In Bands acc. To DIN 46228 Part 4
Press form ............................................................................................ Trapezoid shaped
Cycle time ................................................................................................................. 1.5 s
Control system ......................................................................... Microprocessor controlled
Counter ......................................................................................................... LCD Display
Retooling ......................................................................................................... Below 10 s
Sizes (Width x Length x Height) ......................................................... 6.5 x 12.6 x 11.0 in.
.......................................................................................................... 165 x 320 x 279 mm
Weight ......................................................................................................... approx. 26 lb.
................................................................................................................... approx. 12 kg.
Name Plate
Panduit Corp.
18900 Panduit Drive, Tinley Park, IL 60487 USA
CP-881
Serial Number
Cross Section (working range)
Manufactured: MM-YY
Compliance
Main Connection / Input Current
Conformances
Country of Origin
Fuse Detail
Website Address
PRECAUTIONS AND GENERAL GUIDELINES
The basic condition for safe use and proper operation of
attention to the safety information provided in this
The following safety information must be observed by all
CP-881 Crimping
All rules and instructions for the work place must be
accidents.
PA26958A01_10 ENG
OPERATION MANUAL
Press.
the
CP-881
manual.
persons
who will work with the
observed,
especially
Page: 2 of 28
CP-881 ENG
2
)
is the knowledge
and
those
for prevention of
4-2018