Compliance - Panduit CP-881 Operation Manual

© Panduit Corp. 2018

COMPLIANCE

FCC Part 15, Subpart A
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Conforms to: ETL Intertek No. 4008921
Conforms to: ANSI / UL 987-2013, R. 05-02-2013
Cert. To: CSA C22.2 No. 73, R2009
CAN ICES-1/NMB-1
NOTE: In the interest of higher quality and value, Panduit products are
continually being improved and updated.
Consequently, pictures may vary from the enclosed product.
PA26958A01_10 ENG
OPERATION MANUAL
Page: 1 of 28
CP-881 ENG
4-2018