Safety Warnings - Panduit CP-881 Operation Manual

© Panduit Corp. 2018
This symbol is used to call your attention to hazards or unsafe practices which could result in
an injury or property damage. The signal word, defined below, indicates the severity of the
hazard. The message after the signal word provides information for preventing or avoiding
the hazard.
WARNING
CAUTION

Safety Warnings

Panduit Corp. recommends the tool be used with all installed safety features. Customer
assumes all liability for injury that could result from improper use of this tool and responsibility
for all necessary training to ensure safe operation of this tool.
•
FOR INSTALLATION AND USE BY TRAINED PERSONNEL ONLY.
•
IF ANY DAMAGE TO THE PRODUCT IS APPARENT OR SUSPECTED, DO NOT USE THE
PRODUCT. REFER PRODUCT TO QUALIFIED SERVICE PERSONNEL.
•
FCC WARNING: CHANGES OR MODIFICATIONS TO THE PRODUCT COULD VOID THE
USER'S AUTHORITY TO OPERATE THE PRODUCT.
•
USE RECOMMENDED ACCESSORIES. CONSULT THE OWNER'S MANUAL FOR
RECOMMENDED ACCESSORIES. THE USE OF IMPROPER ACCESSORIES MAY CAUSE
RISK OF INJURY TO PERSONS.
PA26958A01_10 ENG
OPERATION MANUAL
Hazards which, if not avoided, COULD result in severe injury or death.
Hazards or unsafe practices which, if not avoided, MAY result in injury or
property damage.
WARNING
•
Read all safety warning and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
•
Save all warnings and instructions for future reference.
•
The term "power tool" in the warnings refers to your main-operated (corded) power
tool.
WARNING
DO NOT OPERATE POWER TOOLS IN EXPLOSIVE ATMOSPHERES, SUCH AS IN THE
PRESENCE OF FLAMMABLE LIQUIDS, GASES OR DUST.
Power tools create sparks which may ignite the dust or fumes.
Provide adequate ventilation around the product.
KEEP WORK AREA CLEAN AND WELL LIT.
Cluttered or dark areas invite accidents.
KEEP CHILDREN AND BYSTANDERS AWAY.
All visitors should be kept a safe distance fromwork area.
MAKE WORKSHOP KID PROOF with padlocks, master switches, or
by removing starter keys.
WARNING
Page: 3 of 28
CP-881 ENG
4-2018