Operation - Panduit CP-881 Operation Manual

© Panduit Corp. 2018

OPERATION

1. Prepare the cable
o Before crimping, cable must
be aligned as straight as
possible.
2. Cut the cable
o Cut the cable clean and
straight.
NOTE: Poor cut (Diagram 11)
frequently results in
unsuccessful crimping.
PA26958A01_10 ENG
OPERATION MANUAL
Diagram 9:
Prepare the cable
Diagram 10:
Cutting the cable
Diagram 11: Poor cut
Page: 15 of 28
CP-881 ENG
Bend OK
Max. 0.08" – 0.10"
(2-3mm)
over a length of
2.5" (60mm)
Bend too large
Good cut
Surface inclined
Squashed cut, individual
wires protrude
Squashed cut
4-2018