Installing Hvi Power Conductors Outside The Supporting Tube - dehn HVI power Installation Instructions Manual

6.2 Installing HVI
outside the supporting tube
Attach the fixing ring

Remove the Allen screws

Tighten the threaded pins M8 x 50

(tightening torque of 15 Nm)
Place the contact plate on the threaded pins

Install the HVI power Conductor
®

Mount the self-locking nuts with serrated bea-

ring using a tightening torque of 15 Nm to fix
the connection part
Fix the conductor at the fixing ring

power Conductors
®
2.
sectional view
Installing the HVI
Figure 6
outside the supporting tube
3.
4.
6.
15 Nm
5.
1.
7.
power Conductor
®
21