Hvi Power Long - On A Reel - dehn HVI power Installation Instructions Manual

4.4 HVI power long - on a reel
®
HVI power long Conductors are delivered on a disposable reel or are cut to length. It must be ob-
®
served that the connection set required for installation is not included in delivery. Consequently, the
connection set and the required EB connection element(s) must be ordered separately depending on
the requirements, type and configuration of the installation (see Table 5). General accessories and tools
are listed in Table 6, page 12/13.
HVI power long
®
Table 5 HVI power long - Reel and required accessories
®
Part No. Length Delivery includes
819 137 100 m Disposable reel with an ou-
ter diameter of approxima-
tely 900 mm
Width: about 474 mm 1 Al-
len key and installation ins-
tructions
819 165 6 m HVI
pre-assembled
819 142 Connection set:
1 head piece
1 connection element
2 heat shrinkable sleeves
819 149
Connection set,
HVI
410 239 EB connection element
105 279 Variable tripod with EB ele-
ment for the sealing end,
variable height from 610 to
1095 mm (top edge of the
concrete base)
power,
®
power long
®
Field of application
For on-site assembly
Installation outside the suppor-
ting tube
Head piece and
tion element for
tion to both ends of the
HVI power Conductor for in-
®
stallation inside the supporting
tube
Installation outside the suppor-
ting tube
EB connection element (Ø 27
mm) for controlling the electrical
field in the sealing end range.
Required for the second sealing
end.
connec-
connec-
11