ZiLOG Z8 Encore! XP Quick Start Manual page 5

e. Browse to one of the following driver directories based on the Win 7 OS you use.
• For 32-bit Windows 7 systems:
– <ZDS II Installation Directory>\device drivers\USB\x32
– <ZDS II Installation CD>\device drivers\USB\x32
• For 64-bit Windows 7 systems:
– <ZDS II Installation Directory>\device drivers\USB\x64
– <ZDS II Installation CD>\device drivers\USB\x64
f. Click .The
Next
g. Select
Install this driver software anyway
h. When the software has been installed successfully, click
32- and 64-Bit Windows Vista
Observe the following steps to install the USB Smart Cable and associated driver software
for Windows Vista systems.
a. Connect the USB Smart Cable to the host PC. The
box is displayed.
b. Select
Locate and install driver software (recommended)
window is displayed; click
Control
window is displayed, followed by the
dialog box.
c. Select
I don't have the disc. Show me other options.
d. Select Browse my computer for driver software (advanced)
e. Browse to one of the following driver directories based on the Vista OS you use.
• For 32-bit Vista systems:
– <ZDS II Installation Directory>\?evice drivers\USB\x32
– <ZDS II Installation CD>\device drivers\USB\x32
• For 64-bit Vista systems:
– <ZDS II Installation Directory>\device drivers\USB\x64
– <ZDS II Installation CD>\device drivers\USB\x64
f. Click .The
Next
g. Select Install this driver software anyway.
h. When the software has been installed successfully, click
QS002810-0111
Z8FMC16100 Series Motor Control Development Kit
Windows Security
Windows Security
dialog box is displayed.
.
Found New Hardware
. The
Continue Driver Software Installation
Found New Hardware–USB Smart Cable
dialog box is displayed.
Quick Start Guide
.
Close
dialog
. The
User Account
.
.
Close
Page 5 of 12