Ubee UBC1303 User Manual page 75

Ubee Interactive
.
f. Click Apply.
g. Test your local host or application such as your Xbox to see if it is functioning
properly. Continue with port forwarding if the host or application is not
communicating correctly.
2. Assign a Static IP lease to the client/host to which you are setting up forwarding. This
way, the IP does not change and disrupt your forwarding rules. For example, if you are
hosting a Web server in your internal network, and you wish to setup a forwarding rule
for it, assign a static IP lease to that system to keep the IP from renewing and
disrupting the forwarding rule.
6.4.6.2 Setting Up Forwarding
If the suggestions in
communication problem, use port forwarding.
You need the following information to set up port forwarding:
 IP address of each local host system (for example, Xbox) for which you need to
setup a port forwarding rule.
 Port numbers the local host's application listens to for incoming requests/data (for
example, a game or other service). These port numbers should be available in the
documentation associated with the application.
NOTE: For detailed information on port forwarding, including how to set it up for specific
applications using specific network devices (for example, cable modems), refer to:
http://portforward.com
To set up Port Forwarding:
1. Click Advanced Settings from the left side menu.
2. Click Port Forwarding under Advanced Settings.
3. Click the Create Entry button to begin setting up port forwarding.
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017
Before Setting Up Forwarding on page 68
or consult your host device or application user manual.
Using the Advanced Settings Options
did not correct your
69