Table of Contents
Advertisement
6.
Maintenance and Inspection
► Cleaning
• When cleaning, be sure to disconnect the power before doing so.
• The cleaning of this product should be with a soft cloth and a neutral detergent (such as dish soap),diluted with
water and should be wiped lightly. Since it is easy to crack the surface of the product be careful not to wipe with
too much strength.
• Do not wipe this product with volatile chemicals, or chemically treated dustcloth containing benzine,thinner etc.
• Do not wipe with a cloth containing too much moisture. If moisture gets inside the product, it can cause short
circuiting, electric shock, or fire.
• Periodically remove dust from the electric socket to prevent a fire hazard. By allowing dust to adhere to the power
supply terminal, it can be the result of fire or failure from short-circuiting.
► Inspection
• Please check the following contents when inspecting this product.
Inspection Checklist
Supplied Power Source
Surrounding Environment
Power Supply Voltage Tolerance Tolerable Voltage Range should be from AC 100 - 240V
Ambient Temperature
Ambient Humidity
Presence of Dust
Inspection Contents
Operating Temperature Range should be from 0 - 40
Operating Humidity Range should be 20 - 80% RH
No dust should be accumulated
o
C
6
27
Advertisement
Table of Contents
