Table of Contents
Advertisement
3.3.6.
Sending data in the following format will control all the Output Terminal conditions to turn "OFF."
[Transmission Example]
In this example, all the Output Terminals are turned OFF.
• Send Data
Header
[40H]
• Reply Data
Normal response
Data
ACK
[06H]
3
Response Error
Data
NAK
[15H]
The following are conditions which will get a NAK reply and the error contents.
Transmission Condition
Command error
Data size error
* Do not transmit the following command, before this product transmits reply data. It may not operate
normally.
22
<Turn all Output Terminals OFF>
ID
@
?
[3FH]
When a command other than on the list of commands is specified
Data error
Timeout
Reply interval between data is more than 5 seconds after receipt of header
Command
?
C
[3FH]
[43H]
Error Contents
When data, other than 0[30H] - ?[3FH], is used
When the number of bytes in the send data is different
End Code
!
[21H]
Advertisement
Table of Contents
