Table of Contents
Advertisement
5.
Maintenance and Inspection
Cleaning
• When cleaning, be sure to disconnect the power before doing so.
• The cleaning of this product should be with a soft cloth and a neutral detergent (such as dish soap), diluted
with water and should be wiped lightly. Since it is easy to crack the surface of the product when wiping with
too much strength, be careful.
• Do not wipe this product with volatile chemicals, or chemically treated dustcloths containing benzine,
thinner, etc.
• Do not wipe with a cloth containing too much moisture. If moisture gets inside the product, it can cause
short circuiting, electric shock, or fire.
• Periodically remove dust from the electric socket to prevent a fire hazard. By allowing dust to adhere to the
power supply contacts, it can be the result of fire or failure from short-circuiting.
Inspection
• Refer to the list below and check the following contents when inspecting this product.
Inspection Checklist
Supplied Power Source Power Supply Voltage Tolerance Tolerable Voltage Range should be from AC100 to 240V
Surrounding
Environment
Ambient Temperature
Operating Temperature Range should be from 0 to 40oC
Ambient Humidity
Presence of Dust
Inspection Contents
Operating Humidity Range should be 20 to 80% RH
No dust should be accumulated
5
25
Advertisement
Table of Contents
