2.8. Wiring Example
The internal contacts are non-voltage relay contacts. Operate the Terminal Buss below a contact capacity of
DC30V at 3A. In addition, since each contact is independent, different voltages can be connected to the product
for each contact. The Power Supply Output Terminal can supply a maximum current of 500mA at DC24 Volts.
2.8.2.1.
<DC Load Products>
Signal Light, Signal Tower,
Alarm/ Voice Synthesizer
Power Supply Wire (Positive)
Power Supply Wire (Negative)
2.8.2.2.
<AC Load Products>
AC Load Products
MEMO
• Use the AC Adaptor when using the Power Supply Output Terminal in the wiring example.
AC Adaptor
<PHC-D08>
AC Adaptor
<PHC-D08>
-
+
Relay
Control Device
(PC)
USB or RS-232C
Cable
Power Supply
Output Terminal
-
+
Control Device
(PC)
USB or RS-232C Cable
Power Supply
Output Terminal
AC Power Supply
2
15